Bought a Harbor Frieght wire feed welder today. (2024)

I went out on a limb today and bought a Harbor Freight 90 amp wire feed welder. I had a coupon and the final price was 89 bucks so what the heck. At that price I just have to try it. I knew before hand this IS NOT a mig welder its a wire feed welder. It has no shielding gas it uses flux wire. It has two power setting low and high with a duty cycle of 10% @ 80 amps and 18% @ 60 amps.
Assembly and set up was easy. I didn't need the directions. Now for the good part. It actually works and not to bad. I've been rebuilding my 1650 Cub Cadet and I needed to weld a few parts. On the High setting I welded 1/4” bar stock to the ¼” engine cradle with no problems. Then on the Low setting I welded tubing for my exhaust stack and it worked just as good. I even welded the joints from inside the tubing just to see what would happen and had no problems.

http://img36.imageshack.us/img36/9187/pics050.jpg
http://img265.imageshack.us/img265/7850/pics053.jpg

It comes with a 90 day replacement warranty and you can purchase an additional 2 year replacement if you chose. They also have replacement tips and some parts in house.

I didn't start this post for everyone to bash China Town Tools or my decision where to spend my money. I just posted to let you know my experience with the welder. I come from a welding background and I know what quality is.

I've also had good luck with Harbor Freights motorcycle lift. My old Cub Cadet is heavy.
http://img34.imageshack.us/img34/5661/pics051.jpg

If you decide to try it I hope you have as much luck as I have. It paid for itself on just one job.

"If the women don't find you handsome, they should at least find you handy."
Red Green

If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html

Scarecrow67 wrote:I'm new to welding and purchased an arc welder from harbor freight. I haven't had time to play with it. Just thought I'd use it to get some practice. Would this wire feed welder be a good option to help weld on the truck rather than getting a mig welder?

Well, I don't know why it didn't post my reply.
But I think the welder would be OK for general welding, but it might run a bit too hot for sheet metal.

"If the women don't find you handsome, they should at least find you handy."
Red Green

If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html

Yes the welder I bought sells for around $149-169. This weeks sales flier has it on sale again for $89. The Mig welder is also on sale for $159ish Not sure about the $100 welder. Is it the acr welder? I've read some fair reviews about it.

hazelnut wrote:looks like it put down a nice bead, I went by harbor Freight to buy a mig welder that was on sale about 2 months ago and none in stock, after a 45 minute drive i wanted to go home with a welder. The welder you bought was $160 if i remember right, i keep hearing about the $100 welder and how good they work but havent bought one yet.

flyboy2610 wrote:Looks like it does a decent job! Of course, the operator has to have some credit as well!

That is for sure. I bought one of these a long time ago (Still works fine) and the first few times I did nothing but poke a bunch of holes in my rocker panel. Turned down machine and then all I did was get the wire stuck to the rocker panel and had to use wire cutters to free up the wire

I bought the same welder a year or more ago, love the thing.

On my -250, I've been welding up the trim holes in the bed with it, using a 16D nail, through the hole from the rear, tacked in place, allowed to cool, then welded up full. Shaft of the nail falls off, weld needs a little filing or grinding to get it down to level, some needed a tiny little bit of filler.

Also used it to patch up one of the rear corners of the doors, trailing edge of the front fenders, it's great. Recommended it to many others...

too many Fords, no where near 'nuff time.

or, money.

I wish u well with the welder that u have bought!! i have bought one and will never ever buy one from them again!!I thought buying one from there would be fine for me to start out with! It was the biggist pice of s%*t and it was a waste of my hard earned money! I got tiered takeing it back to the store ,i did this 3X !!!for get it I got store credit for it as they did'nt want to give my money back,U get what you pay for!!!
I have bought alot of things from them over the years and alot is still working fine but never a weller again!
so I bought a miller 211 mig welder( and it cost me both arms and legs and my 3 week ends ) and had not a one thing go bad at all with it yet ,( knock on wood) just my

fbomb100 wrote:I wish u well with the welder that u have bought!! i have bought one and will never ever buy one from them again!!I thought buying one from there would be fine for me to start out with! It was the biggist pice of s%*t and it was a waste of my hard earned money! I got tiered takeing it back to the store ,i did this 3X !!!for get it I got store credit for it as they did'nt want to give my money back,U get what you pay for!!!
I have bought alot of things from them over the years and alot is still working fine but never a weller again!
so I bought a miller 211 mig welder( and it cost me both arms and legs and my 3 week ends ) and had not a one thing go bad at all with it yet ,( knock on wood) just my

Wow. So many exclamation points and no capital letters.

My 1969 F-100